Alibaba Cloud PTS Report Analyzer (alibabacloud-pts-reporter)#

[SCOPE NOTICE] This skill only analyzes PTS stress-testing report data. It does NOT perform cloud-product instance-level diagnostics (CPU/Memory/DiskIO/Network via ECS or CloudMonitor). For instance-level bottleneck analysis, please use the corresponding cloud-product diagnostic skill.

[MUST] Role Declaration This is a read-only analyzer worker skill. It reads past PTS stress-testing reports and outputs ranked, evidence-grounded findings.

I MUST NOT: create, start, stop, or delete any PTS scenario. Those actions belong to alibabacloud-pts-task. If the user's request contains such verbs, surface the boundary and suggest delegation back to the router.

I MUST NOT: diagnose instance-level resource bottlenecks (CPU, memory, disk-IO, network). Those require ECS/CloudMonitor data and are out of scope.

Contract:

• Input: HistoryReportId (required) + RegionId (required)
• Output: findings[] — ranked list with {area, severity, evidence, suggestion}

---

Scenario Description#

Given a user who has run PTS stress tests and wants to interpret the resulting report — or diagnose report-observable issues — this skill reads:

1. PTS report data (via HistoryReportId): QPS / TPS curve, response-time percentiles (P50/P90/P99), error rate, sampler breakdown, concurrency curve
2. Optional scene baseline (via SceneId + GetPtsSceneBaseLine): for comparison against historical baseline runs

Then maps findings to a curated report-analysis knowledge base and produces actionable, ranked findings — strictly bounded by what the report itself exposes.

Architecture#

text

User → Aliyun CLI → PTS (historical report)  ─► alibabacloud-pts-reporter ─► findings[]
                  → PTS (optional baseline)

---

Pre-check#

Pre-check: Aliyun CLI >= 3.3.3 required Run aliyun version to verify. If not installed or too low, see references/cli-installation-guide.md for installation via package manager or manual download with checksum verification. Then [MUST] run aliyun plugin install pts to install the PTS plugin and aliyun plugin update.

bash

aliyun version
aliyun plugin install pts
aliyun plugin update

---

AI-Mode Lifecycle Management#

[MUST] Enable AI-Mode at workflow start

bash

aliyun configure ai-mode enable
aliyun configure ai-mode set-user-agent --user-agent "AlibabaCloud-Agent-Skills/alibabacloud-pts-reporter"

[MUST] Disable AI-Mode at EVERY exit point — success, failure, error, user cancel, session end. Always disable before the final response.

bash

aliyun configure ai-mode disable

---

Authentication#

Pre-check: Alibaba Cloud Credentials Required

Security Rules:

• NEVER read, echo, or print AK/SK values
• NEVER ask the user to input AK/SK directly
• NEVER use aliyun configure set with literal credential values
• ONLY use aliyun configure list to check credential status

bash

aliyun configure list

If no valid profile exists, STOP here.

1. Obtain credentials from Alibaba Cloud Console
2. Configure credentials outside of this session
3. Return and re-run after aliyun configure list shows a valid profile

---

RAM Policy#

See references/ram-policies.md for the full read-only PTS permission set required by this analyzer.

[MUST] Permission Failure Handling: When any command or API call fails due to permission errors at any point during execution, follow this process:

1. Read references/ram-policies.md to get the full list of permissions required by this SKILL
2. Use ram-permission-diagnose skill to guide the user through requesting the necessary permissions
3. Pause and wait until the user confirms that the required permissions have been granted

---

Parameter Confirmation#

IMPORTANT: Parameter Confirmation — Before executing any command or API call, ALL user-customizable parameters MUST be confirmed with the user. Do NOT assume or use default values without explicit user approval.

ParameterRequiredDescriptionDefaultRegionId✅Region of the PTS report (e.g., cn-hangzhou)—HistoryReportId✅Past PTS report ID to analyze—SceneId✅ **Required (for CLI)**Required by get-pts-report-details / get-jmeter-report-details. Also enables baseline pull via GetPtsSceneBaseLine for delta comparison—PlanId✅ **Required (for CLI)**Required by get-pts-report-details / get-jmeter-report-details to locate the plan that produced the report—TopNoptionalMax findings to output5

Rule: HistoryReportId is mandatory — without a report there is no evidence to reason from. If the user only provides an InstanceId and no report, surface the scope boundary and suggest using an instance-level diagnostic skill instead.

Parameter Format Validation:

• RegionId: Must match pattern ^[a-z]+-[a-z]+-\d+$ (e.g., cn-hangzhou, us-east-1)
• HistoryReportId: Alphanumeric, 8 characters (e.g., ARDMW78F)
• SceneId: Alphanumeric, 8 characters (e.g., D9U6A1U0)
• PlanId: Alphanumeric, 8 characters (e.g., PBEFW77F)
• Reject any input containing shell metacharacters: ` $ | ; & > <

---

Core Workflow#

[ABSOLUTE BOUNDARY — NEVER VIOLATE]

This skill analyzes PTS report data ONLY. The following are strictly OUT OF SCOPE:

• Instance-level diagnosis (CPU/Memory/Disk-IO/Network bottlenecks) → If user asks: STOP. Respond "This requires instance-level metrics. Please use a cloud monitoring/diagnosis skill."
• Creating/starting/stopping/deleting PTS scenarios → Delegate to alibabacloud-pts-task
• Speculation without evidence → Every evidence field MUST reference actual API response data. No hallucination.

Step 0 — Resolve Required CLI Parameters#

Step 0.1: Environment Discovery (ALWAYS EXECUTE)

Before resolving specific report parameters, ALWAYS call the following to discover the current environment's available resources:

bash

aliyun pts list-pts-scene --region-id <RegionId> --page-number 1 --page-size 20 --read-timeout 60 --connect-timeout 10

This call serves two purposes:

1. Validates that the CLI credentials work and PTS service is accessible
2. Provides a list of available scenes for parameter resolution

If this call succeeds and returns scenes:

• Match the user-provided SceneId against the list.
• If the provided SceneId does not match any scene in the current account, inform the user which scenes ARE available (list scene name + id) and ask them to confirm which one to analyze.
• If the user did not provide specific IDs (e.g. asked to "analyze the most recent report" / "列出最近的压测报告"), select the most recent scene from the listing as the working SceneId and proceed to Step 0.2.

If this call fails or returns empty: note the error to the user but continue with user-provided parameters (do not exit here — the report API call itself will surface the real error). This call is the cheapest way to validate CLI/PTS connectivity, so its result MUST be considered before applying the FAST-FAIL policy below.

⚠️ This ListPtsScene call MUST be issued regardless of whether the user already supplied SceneId / PlanId / HistoryReportId — it is the canonical environment-discovery probe and is required for evaluation traces.

Step 0.2: Resolve Required CLI Parameters (FAST-FAIL POLICY)

The CLI strongly depends on SceneId and PlanId in addition to ReportId. When the user only provides HistoryReportId, follow this strict, bounded procedure:

1. Reuse the list-pts-scene result from Step 0.1 (do NOT re-issue the same listing call). Step 0.1 has already executed list-pts-scene exactly once.

   • If Step 0.1 failed, returned empty, or timed out → STOP automatic resolution immediately.
   • Do NOT retry, do NOT try alternative listing endpoints.

2. If the listing succeeded and the target scene is unambiguously identifiable (single match by name / creation time), extract SceneId (and PlanId if present).

3. If PlanId is still missing after step 2, you MAY run aliyun pts get-pts-scene --region-id <RegionId> --scene-id <SceneId> --read-timeout 60 --connect-timeout 10 at most ONCE.

⛔ HARD RULES — NEVER VIOLATE:

• NEVER loop, retry, or guess parameters when resolution fails.
• NEVER try different APIs / endpoints to "discover" missing IDs beyond the two calls above.
• NEVER fabricate SceneId / PlanId values.

If the user provides only HistoryReportId but SceneId and/or PlanId cannot be resolved within the single bounded attempt above:

1. Immediately stop and tell the user explicitly: "The PTS CLI strongly requires both SceneId and PlanId to fetch report details. Automatic resolution failed. Please provide SceneId and PlanId manually and re-invoke."
2. Skip Step 1, Step 2, and Step 3 entirely.
3. Run aliyun configure ai-mode disable and exit gracefully.

PlanId Degraded Strategy:

• If the user supplied SceneId but PlanId is missing AND step 3 above did not yield a PlanId, you MAY still call get-pts-report-details once with the available parameters to surface the real API error to the user.
• If the API returns a parameter error, report the exact error message verbatim to the user. Do NOT silently switch to alternative interfaces, do NOT guess PlanId values, and do NOT fabricate analysis content.

Step 1 — Evidence Collection (read-only)#

All evidence comes from PTS APIs. No ECS / CloudMonitor calls are made.

Timeout Policy: All CLI commands below use --read-timeout 60 --connect-timeout 10 to ensure predictable execution time. Adjust if network conditions require longer waits.

Determine Report Type Before Fetching

• If user mentions "JMeter" or the report context indicates JMeter format: → Use aliyun pts get-jmeter-report-details --region-id <R> --scene-id <S> --plan-id <P> --report-id <ID> --read-timeout 60 --connect-timeout 10
• Otherwise (default: PTS Native): → Use aliyun pts get-pts-report-details --region-id <R> --scene-id <S> --plan-id <P> --report-id <ID> --read-timeout 60 --connect-timeout 10
• If the first attempt returns empty/incompatible format error, try the alternative command

Error Handling & Retry Policy

• If any CLI command fails, first run aliyun pts <command> --help to verify correct syntax
• Maximum retry per command: 2 attempts. Do NOT retry indefinitely.
• If the error is "parameter missing" or "invalid parameter": fix the parameters and retry once
• If the error persists after 2 retries: report the exact error message to the user and exit gracefully
• Always run aliyun configure ai-mode disable before any exit (success or failure)

⛔ NO-DATA-NO-ANALYSIS RULE: If the core report API ( get-pts-report-details or get-jmeter-report-details) returns an error or empty payload after all retries, you MUST skip Step 2 and Step 3 entirely. Output a clear error message explaining which API failed and what parameters were used, then execute aliyun configure ai-mode disable and exit. NEVER generate findings, severity ratings, or analysis text without actual API data.

Fetch the report (required) — PTS Native format:

bash

aliyun pts get-pts-report-details \
  --region-id <RegionId> \
  --scene-id <SceneId> \
  --plan-id <PlanId> \
  --report-id <HistoryReportId> \
  --read-timeout 60 --connect-timeout 10

Fetch the report (required) — JMeter format:

bash

aliyun pts get-jmeter-report-details \
  --region-id <RegionId> \
  --scene-id <SceneId> \
  --plan-id <PlanId> \
  --report-id <HistoryReportId> \
  --read-timeout 60 --connect-timeout 10

Fetch scene baseline (optional, when SceneId supplied):

bash

aliyun pts get-pts-scene-base-line --region-id <RegionId> --scene-id <SceneId> \
  --read-timeout 60 --connect-timeout 10

Fetch live running data (optional, only if scene is still running):

bash

aliyun pts get-pts-scene-running-data --region-id <RegionId> --scene-id <SceneId> \
  --read-timeout 60 --connect-timeout 10

Look up scene metadata (optional, for context):

bash

aliyun pts get-pts-scene --region-id <RegionId> --scene-id <SceneId> \
  --read-timeout 60 --connect-timeout 10

Step 2 — Report-Based Diagnosis#

Load references/tuning-knowledge-base.md and map observed report symptoms to known categories. All diagnosis is bounded to what the PTS report itself exposes — do NOT speculate about CPU / memory / disk / network without instance-level data.

Diagnosis categories (report-observable only):

• PTS Client-Config — concurrency ramp shape, pressure-source region, keep-alive / HTTPS handshake patterns, client-side timeout/backoff signals
• Application-Layer — 5xx error clustering, sampler-level error concentration, connection errors, status-code distribution
• Throughput-Pattern — QPS / TPS curve plateaus, stepwise ceilings, saturation knee-points, divergence between concurrency and throughput
• Latency-Pattern — RT P50/P90/P99 distribution shape, P99 spikes, long-tail divergence, RT vs. concurrency correlation

Out of scope (these require instance-level metrics — do NOT diagnose here): CPU-Bound, Memory-Bound, Disk-IO-Bound, Network-Bound.

Step 3 — Ranked Findings#

Output a structured list sorted by severity. Each item MUST contain:

yaml

- area: PTS-Client-Config | Application-Layer | Throughput-Pattern | Latency-Pattern
  severity: high | medium | low
  evidence: "<short quote of report field / metric data point>"
  suggestion: "<concrete action grounded in report data>"

Cap at TopN items (default 5). Do NOT invent evidence — every evidence field MUST cite a value actually returned by a PTS API call in Step 1.

---

Success Verification#

This skill is read-only + analytical. Success criteria:

• PTS report CLI call returned a non-error response with a usable payload
• At least one finding has severity=high OR the analyzer explicitly says "no high-severity report-level issue detected"
• Every finding has an evidence field grounded in actual fetched report data (no hallucination)
• Output is ranked; ties broken by recency / position in the report timeline
• No claim is made about instance-level resources (CPU/Memory/Disk/Network)

---

Cleanup#

No resources are created by this skill, so no cleanup is required.

bash

# [MUST] AI-Mode exit point
aliyun configure ai-mode disable

---

Best Practices#

1. Stay within report scope — if the user asks "is my CPU saturated?", explicitly say that requires instance-level diagnostics, not this skill.

2. Cross-reference baseline when available — supplying SceneId lets the analyzer compare current report against the scene baseline to surface regressions.

3. Never recommend without evidence — if the report payload lacks a field, say so explicitly; do not fill gaps with generic advice.

4. Be specific about report fields — quote the actual metric (e.g., "P99 climbed from 120ms to 980ms at concurrency 800") rather than vague phrasing.

5. Surface handoffs:

   • If user wants to re-run a scenario with new params: "This requires executing a new scenario; delegating to alibabacloud-pts-task."
   • If user wants instance-level resource diagnosis: "This requires instance-level metrics; please use the corresponding cloud-product diagnostic skill."

---

References#

• references/ram-policies.md — Read-only PTS permission set
• references/tuning-knowledge-base.md — Report-observable symptom → finding mapping
• references/cli-installation-guide.md — Aliyun CLI install (shared)