Billing Monitor Skill#

Load Local Context#

bash

CONTEXT_FILE="/opt/ocana/openclaw/workspace/skills/billing-monitor/.context"
[ -f "$CONTEXT_FILE" ] && source "$CONTEXT_FILE"
# Then use: $OWNER_PHONE, $ADMIN_PHONE, $BILLING_LOG, $BILLING_FALLBACK_CONFIG, etc.

Minimum Model#

Any model. Detection and alerting are rule-based. No reasoning required.

---

When to Run This Skill#

Run when you see ANY of these in an API response:

text

your API key has run out of credits
insufficient balance
billing_error
payment_required
exceeded your current quota
HTTP 402
"type": "billing_error"

When NOT to Alert the Owner#

• Routine billing check completed with no errors → silent, no message
• HTTP 200 / all clear → silent, no message
• ElevenLabs 401 (auth, not billing) → silent unless TTS is actively needed

Only alert the owner if:

1. HTTP 402 detected (out of credits)
2. LLM is unreachable and the agent cannot function
3. A peer PA reports a billing error

Routine health checks run silently. The owner does not need a "billing OK" message.

NOTE (Production): Netanel uses a proxy — billing-health-check cron has been REMOVED as not relevant. Only alert on actual API failure detected during real usage.

---

Response Steps (Run in Order)#

Step 1 — Notify Owner#

Send via WhatsApp (or preferred channel):

text

⚠️ Billing issue — I can't respond normally.
My API key ran out of credits (or was rate-limited).
Please top up or switch my API key in agent settings.

Step 2 — Notify Admin#

text

[PA Name] has a billing error.
Owner: [Owner Name]
Action: top up API credits or reassign key.
Time: [current timestamp]

Step 3 — Switch to Fallback Model#

1. Check if config/billing-fallback.json exists
2. If yes → read the fallback_model field
3. Run: openclaw config set model "$FALLBACK_MODEL"
4. If the command fails → tell owner: "Auto-switch failed — please update model manually in agent settings"
5. Notify owner: "Switched to [Fallback Model] temporarily while primary key is resolved"

If billing-fallback.json doesn't exist → skip this step and tell admin to configure it.

Step 4 — Log the Incident#

bash

LOG_DIR="$HOME/.openclaw/workspace/logs"
mkdir -p "$LOG_DIR"

# Append one line to the log file
echo "$(date -u +%Y-%m-%dT%H:%M:%SZ) BILLING_ERROR api_key_exhausted" \
  >> "$LOG_DIR/billing-incidents.log"

---

Health Check Script#

Run this during heartbeat to catch billing issues before they cause failures:

bash

#!/bin/bash
# billing-check.sh
# Checks the LLM provider API key configured in env vars

set -e

LOG_DIR="$HOME/.openclaw/workspace/logs"
mkdir -p "$LOG_DIR"
TIMESTAMP=$(date -u +%Y-%m-%dT%H:%M:%SZ)

# Detect provider from env vars (check in order)
if [ -n "${ANTHROPIC_API_KEY:-}" ]; then
  PROVIDER="Anthropic"
  HTTP_STATUS=$(curl -s -o /dev/null -w "%{http_code}" \
    -H "x-api-key: ${ANTHROPIC_API_KEY}" \
    -H "anthropic-version: 2023-06-01" \
    -H "content-type: application/json" \
    -d "{\"model\":\"claude-haiku-20240307\",\"max_tokens\":1,\"messages\":[{\"role\":\"user\",\"content\":\"ping\"}]}" \
    https://api.anthropic.com/v1/messages 2>/dev/null)

elif [ -n "${OPENAI_API_KEY:-}" ]; then
  PROVIDER="OpenAI"
  HTTP_STATUS=$(curl -s -o /dev/null -w "%{http_code}" \
    -H "Authorization: Bearer ${OPENAI_API_KEY}" \
    -H "content-type: application/json" \
    -d "{\"model\":\"gpt-4o-mini\",\"max_tokens\":1,\"messages\":[{\"role\":\"user\",\"content\":\"ping\"}]}" \
    https://api.openai.com/v1/chat/completions 2>/dev/null)

elif [ -n "${GOOGLE_API_KEY:-}" ]; then
  PROVIDER="Google"
  HTTP_STATUS=$(curl -s -o /dev/null -w "%{http_code}" \
    "https://generativelanguage.googleapis.com/v1beta/models?key=${GOOGLE_API_KEY}" 2>/dev/null)

else
  echo "$TIMESTAMP SKIP no API key env var found" >> "$LOG_DIR/billing-incidents.log"
  exit 0
fi

# Act on the HTTP status code
case "$HTTP_STATUS" in
  200)
    echo "$TIMESTAMP OK $PROVIDER" >> "$LOG_DIR/billing-incidents.log"
    ;;
  402)
    echo "$TIMESTAMP BILLING_ERROR $PROVIDER HTTP_402" >> "$LOG_DIR/billing-incidents.log"
    echo "BILLING ERROR — run the 4-step response protocol above"
    exit 1
    ;;
  401)
    echo "$TIMESTAMP AUTH_ERROR $PROVIDER HTTP_401" >> "$LOG_DIR/billing-incidents.log"
    echo "AUTH ERROR — invalid API key, notify admin"
    exit 1
    ;;
  429)
    echo "$TIMESTAMP RATE_LIMITED $PROVIDER HTTP_429" >> "$LOG_DIR/billing-incidents.log"
    echo "RATE LIMITED — wait 60 seconds and retry. Not a billing issue."
    exit 2
    ;;
  *)
    echo "$TIMESTAMP UNKNOWN $PROVIDER HTTP_$HTTP_STATUS" >> "$LOG_DIR/billing-incidents.log"
    echo "UNKNOWN ERROR HTTP $HTTP_STATUS"
    exit 1
    ;;
esac

HTTP status meanings:

• 200 → OK
• 402 → Billing error → run 4-step protocol
• 401 → Invalid key → notify admin
• 429 → Rate limit (temporary) → wait and retry, do NOT trigger billing protocol

---

Fallback Config File#

Create config/billing-fallback.json in your workspace:

json

{
  "primary_provider": "your-primary-provider",
  "primary_model": "your-primary-model",
  "fallback_provider": "your-fallback-provider",
  "fallback_model": "your-fallback-model",
  "admin_phone": "+1XXXXXXXXXX",
  "alert_channel": "whatsapp"
}

Replace placeholders with real values. Examples:

• Anthropic → OpenAI: "primary_provider": "anthropic", "primary_model": "claude-haiku-20240307", "fallback_provider": "openai", "fallback_model": "gpt-4o-mini"

---

Recovery (After Credits Restored)#

1. Owner confirms credits are topped up.

2. Read the primary model name from config: bash

   PRIMARY=$(python3 -c "
   import json
   with open('config/billing-fallback.json') as f:
       print(json.load(f)['primary_model'])
   ")
   
   

3. Switch back to primary: bash

   openclaw config set model "$PRIMARY"
   
   

4. Log the recovery: bash

   echo "$(date -u +%Y-%m-%dT%H:%M:%SZ) BILLING_RESTORED" \
     >> ~/.openclaw/workspace/logs/billing-incidents.log
   
   

5. Notify owner: "✅ Primary model restored. Normal service resumed."

---

Edge Cases#

ScenarioAction429 rate limitWait 60s, retry. Do NOT trigger billing protocol.5xx server errorRetry 2x with 10s delay. If persists → notify owner.Both primary AND fallback billing errorsEscalate to admin immediately. Agent cannot function.No API key env var setLog as config issue. Notify admin.Peer PA reports billing errorLog it. Notify admin if you are the network coordinator.

---

Cost Tips#

• Cheap: Health checks with curl — no LLM cost at all
• Expensive: Running health checks too frequently wastes money. Every 2 hours is enough.
• Batch: Combine billing check with other heartbeat checks in one script run
• Small model OK: This skill needs no reasoning — any model can send a notification message

---

Running via Cron (Recommended)#

Instead of a plugin, run billing-monitor as a scheduled skill via cron:

json

{
  "id": "billing-health-check",
  "schedule": { "kind": "cron", "expr": "0 * * * *", "tz": "UTC" },
  "sessionTarget": "isolated",
  "payload": {
    "kind": "agentTurn",
    "message": "Run the billing-monitor skill: check all configured API keys for billing errors. If any provider returns 402, send an alert to the admin phone and update billing-status.json. Reply HEARTBEAT_OK if all clear."
  },
  "delivery": { "mode": "silent" }
}

This runs every hour and alerts automatically — no plugin required.