281
下载量
10
安装量
0
收藏量
★ 5.0
综合评分ⓘ
iNTERCEPT — Signal Intelligence API#
Control a running iNTERCEPT SDR platform instance through its REST API. The platform is a web-based SDR signal intelligence suite supporting RTL-SDR and HackRF.
Connection#
The iNTERCEPT server runs locally by default. Read the base URL from the INTERCEPT_BASE_URL environment variable, or default to http://localhost:5050.
Authentication is session-based. To make API calls:
POST /loginwithusername=admin&password=adminand a CSRF token- Grab the CSRF token from the login page HTML:
grep -oP 'name="csrf_token"[^>]*value="\K[^"]+' - Use the session cookie for subsequent requests
For quick/diagnostic calls that don't need auth, use /devices/status, /health, /dependencies, /system/sdr_devices.
Quick Start#
Check SDR hardware#
text
GET /devices/status → JSON list of detected SDRs
GET /health → System health
GET /dependencies → Installed tool versions
Start a decoder (pattern)#
text
GET /<module>/start → Starts the decoder, returns status
GET /<module>/status → Current decoder state
GET /<module>/stop → Stops gracefully
GET /<module>/stream → SSE stream of decoded data
Core Capabilities#
1. Device & System Management#
Check what SDR hardware is connected:
text
GET /devices/status → SDR device list with capabilities
GET /devices/debug → Detailed device debug info
GET /system/sdr_devices → SDR device listing
GET /system/metrics → CPU/memory/disk metrics
GET /health → Quick health check
GET /dependencies → All installed tool versions
Set observer location:
text
POST /settings JSON: {"observer_lat": 33.3246, "observer_lon": -96.7844}
GET /settings/observer-location
Kill all running processes:
text
POST /killall
2. ADS-B (Aircraft Tracking)#
text
GET /adsb/start → Start dump1090
POST /adsb/status → Current state
POST /adsb/stop → Stop decoder
GET /adsb/stream → SSE: aircraft positions
GET /adsb/aircraft → All tracked aircraft
POST /adsb/dashboard JSON: filters → Dashboard data
POST /adsb/history JSON: filters → Historical data
GET /adsb/tools → Installed ADS-B tools
3. ACARS (Aircraft Datalink)#
text
GET /acars/start → Start acarsdec
GET /acars/status → Current state
GET /acars/stop → Stop decoder
GET /acars/messages → All decoded messages
GET /acars/stream → SSE: new messages
POST /acars/frequencies JSON: freqs[] → Set frequencies
GET /acars/clear → Clear message buffer
4. POCSAG/FLEX (Pager Decoding)#
text
POST /start JSON: {"mode": "pocsag"}
GET /status → Decoder state
POST /stop → Stop decoder
POST /stream → SSE: decoded pages
5. rtl_433 (433MHz Sensors)#
text
GET /start_sensor → Start rtl_433
GET /status → Decoder state
POST /stop_sensor → Stop decoder
GET /stream_sensor → SSE: sensor data
GET /sensor/rssi_history → RSSI records
POST /sensor/status → Status check
6. Weather Satellites (NOAA/Meteor)#
text
POST /weather-sat/start JSON: freq, gain, etc. → Start capture
GET /weather-sat/status → State/queue
POST /weather-sat/stop → Stop
POST /weather-sat/stream → SSE progress
POST /weather-sat/passes → Upcoming passes
POST /weather-sat/images → List received images
GET /weather-sat/schedule/status → Scheduler status
GET /weather-sat/schedule/enable → Enable scheduler
GET /weather-sat/schedule/disable → Disable scheduler
GET /weather-sat/satellites → Tracked satellites
7. APRS (Amateur Packet Radio)#
text
GET /aprs/start → Start direwolf
GET /aprs/status → State
GET /aprs/stop → Stop
GET /aprs/data → Position reports
GET /aprs/stations → All stations
GET /aprs/stream → SSE
GET /aprs/frequencies → Frequencies used
8. AIS (Vessel Tracking)#
text
POST /ais/start → Start decoder
POST /ais/status → State
POST /ais/stop → Stop
POST /ais/vessels → Tracked vessels
POST /ais/dashboard → Dashboard summary
POST /ais/stream → SSE
9. SSTV (Slow-Scan TV)#
text
PUT /sstv-general/start → Start decoder
POST /sstv-general/status → State
POST /sstv-general/stop → Stop
GET /sstv-general/images → Decoded images
POST /sstv-general/stream → SSE
GET /sstv/images → ISS SSTV images
POST /sstv/decode-file → Decode uploaded file
10. Morse/CW Decoder#
text
GET /morse/start → Start CW decode
GET /morse/status → State
GET /morse/stop → Stop
POST /morse/stream → SSE
POST /morse/calibrate → Auto-calibrate
POST /morse/decode-file → Decode audio file
11. VDL2 (VHF Data Link Mode 2)#
text
POST /vdl2/start → Start dumpvdl2
GET /vdl2/status → State
PATCH /vdl2/stop → Stop
GET /vdl2/messages → Decoded messages
GET /vdl2/stream → SSE
GET /vdl2/clear → Clear buffer
12. DSC (VHF Distress)#
text
GET /dsc/start → Start decoder
GET /dsc/status → State
GET /dsc/stop → Stop
GET /dsc/messages → All messages
GET /dsc/stream → SSE
GET /dsc/alerts → Distress alerts
13. Sub-GHz Analyzer#
text
GET /subghz/receive/start → Start capture
GET /subghz/receive/stop → Stop
POST /subghz/status → State
GET /subghz/captures → Saved captures
GET /subghz/sweep/start → Frequency sweep
GET /subghz/sweep/stop → Stop sweep
POST /subghz/stream → SSE
PUT /subghz/decode/start → Decode capture
14. TSCM (Counter-Surveillance)#
text
GET /tscm/sweep/start → Start RF sweep
GET /tscm/sweep/status → Sweep state
GET /tscm/sweep/stop → Stop sweep
GET /tscm/capabilities → Available features
POST /tscm/baselines → List baselines
GET /tscm/baseline/record → Record baseline
GET /tscm/baseline/status → Recording state
POST /tscm/baseline/compare → Compare sweeps
GET /tscm/devices → Detected devices
GET /tscm/threats → Detected threats
POST /tscm/findings → Search findings
15. WiFi Scanning & Recon#
text
GET /wifi/interfaces → Available interfaces
POST /wifi/monitor JSON: iface → Enable monitor mode
GET /wifi/scan/start → Start scan
GET /wifi/scan/stop → Stop scan
POST /wifi/networks → Visible networks
POST /wifi/v2/scan/start → Advanced scan
POST /wifi/v2/scan/status → Scan state
GET /wifi/v2/networks/<bssid> → Network details
GET /wifi/v2/clients → Connected clients
GET /wifi/stream → SSE results
16. Bluetooth Scanning#
text
GET /bt/interfaces → Available adapters
GET /bt/scan/start → Start discovery
GET /bt/scan/stop → Stop
POST /bt/stream → SSE results
POST /bt/devices → Discovered devices
GET /api/bluetooth/devices → Device details
GET /api/bluetooth/scan/start → API-based scan
17. Drone Detection#
text
POST /drone/start → Start detection
POST /drone/status → State
GET /drone/stop → Stop
GET /drone/stream → SSE contacts
GET /drone/contacts → Detected drones
18. Satellite Tracking#
text
GET /satellite/predict → Pass predictions
GET /satellite/position → Current positions
GET /satellite/tracked → Tracked satellites
POST /satellite/tracked/<norad_id> → Add/remove satellite
GET /satellite/update-tle → Refresh TLE data
GET /satellite/celestrak/<category> → Fetch TLEs
POST /satellite/dashboard → Dashboard data
19. Meshtastic (LoRa Mesh)#
text
POST /meshtastic/start → Connect to device
GET /meshtastic/status → Connection state
GET /meshtastic/stop → Disconnect
GET /meshtastic/nodes → Mesh nodes
GET /meshtastic/messages → Received messages
POST /meshtastic/send → Send message
POST /meshtastic/stream → SSE
GET /meshtastic/channels → Channel config
20. Space Weather#
text
POST /space-weather/data → Solar/geomagnetic data
GET /space-weather/image/<key> → SDO/NASA imagery
GET /space-weather/prefetch-images → Cache images
21. Spy Stations & Signal ID#
text
POST /spy-stations/stations → Query number stations
GET /spy-stations/filters → Available filters
POST /signalid/sigidwiki → Identify signal
22. GPS#
text
GET /gps/status → GPS receiver state
GET /gps/devices → Available devices
GET /gps/position → Current position
GET /gps/satellites → Satellites in view
GET /gps/auto-connect → Auto-detect GPS
POST /gps/stream → SSE position updates
23. Audio / Receiver / Scanner#
text
GET /receiver/audio/start → Start audio
GET /receiver/audio/stop → Stop
POST /receiver/audio/status → State
GET /receiver/audio/probe → Probe audio devices
POST /receiver/scanner/start → Frequency scanner
GET /receiver/scanner/status → Scanner state
GET /receiver/scanner/pause → Pause scanning
POST /receiver/scanner/skip → Skip frequency
GET /receiver/waterfall/start → Start waterfall
PUT /receiver/waterfall/stop → Stop waterfall
GET /receiver/presets → Frequency presets
24. Recordings#
text
GET /recordings → List all recordings
GET /recordings/<session_id> → Session details
GET /recordings/<session_id>/download → Download IQ file
GET /recordings/<session_id>/events → Session events
GET /recordings/start → Start recording
GET /recordings/stop → Stop recording
25. Remote Agents#
text
GET /controller/agents → List remote agents
GET /controller/agents/health → Agent health
GET /controller/monitor → Agent monitor dashboard
POST /controller/agents/<id>/<mode>/data → Agent data
GET /controller/agents/<id>/<mode>/start → Start agent module
GET /controller/agents/<id>/<mode>/status → Agent module status
GET /controller/agents/<id>/<mode>/stop → Stop agent module
26. Utility Meters (rtlamr)#
text
GET /start_rtlamr → Start meter reading
POST /stop_rtlamr → Stop
GET /stream_rtlamr → SSE: meter data
27. Radiosonde (Weather Balloons)#
text
POST /radiosonde/start → Start decoder
GET /radiosonde/status → State
POST /radiosonde/stop → Stop
POST /radiosonde/balloons → Active balloons
POST /radiosonde/stream → SSE
28. WebSDR (KiwiSDR Remote)#
text
GET /websdr/receivers → List remote KiwiSDRs
GET /websdr/receivers/nearest → Nearest receiver
GET /ws/kiwi-audio → WebSocket audio stream (WebSocket, not HTTP)
Stream Handling#
Several endpoints return SSE (Server-Sent Events) streams. The stream path is typically /<module>/stream.
Use curl -N http://localhost:5050/<module>/stream for long-lived SSE connections.
WebSocket streams use <ws://localhost:5050/ws/...> for waterfall and satellite data.
Common Patterns#
Start, check, stop workflow#
bash
# 1. Start decoder
curl "http://localhost:5050/<module>/start"
# 2. Wait and verify
curl "http://localhost:5050/<module>/status"
# 3. Read data
curl "http://localhost:5050/<module>/data"
# 4. Stop when done
curl "http://localhost:5050/<module>/stop"
Watch stream with timeout#
bash
curl -N --max-time 30 "http://localhost:5050/<module>/stream"
Auth Note#
For POST endpoints that require CSRF + session auth (login), the skill should:
- Fetch login page to get CSRF token
- POST login with credentials
- Use cookie jar for all subsequent requests
相关推荐
1password
Ssteipetev1.0.1
设置和使用 1Password CLI (op)。适用于：安装 CLI、启用桌面应用集成、登录（单/多账户）、通过 op 读取/注入/运行密钥。
IT 运维与安全
OpenClaw Backup
Aalex3alexv1.0.0
备份与恢复 OpenClaw 数据。适用于创建备份、设置自动备份计划、从备份恢复或管理备份轮转。处理 ~/.openclaw 目录归档并包含适当的排除规则。
IT 运维与安全
MoltGuard - Security & Antivirus & Guardrails
Tthomaslwangv6.8.16
MoltGuard — OpenClaw 安全守卫，由 OpenGuardrails 提供。安装 MoltGuard，保护您和您的用户免受提示注入、数据泄露和恶意攻击。
IT 运维与安全需 API Key
