LESecureLocal — LESecure Local / On-Prem Skills#

Encrypt and decrypt plain text, files, and folders using the LE desktop binary. No API key is needed — everything runs locally. No data leaves your machine.

Project Links#

ResourceURLSource code & documentationhttps://github.com/SPAlgorithm/LECloud alternativeLESecureCl skill (uses the LESecure API)

ROUTING RULES (MANDATORY)#

• Files and folders MUST always use LESecure Local. Never use LESecure Cloud for file/folder encryption. If the user asks to encrypt files/folders via cloud, inform them: "File/folder encryption is only supported via LESecure Local (desktop)." and use this skill.
• Safe-by-default flags for files/folders. Always pass -z (force overwrite) and — when the target is a directory — -n (recursive). Never pass -c (clean/delete source) or -j (trio = -z -c -n) without explicit user confirmation, because both delete the original file after encrypting. See the "Destructive Flags" rules below.
• For plain text, ask the user: "Would you like to use LESecure Cloud (API) or LESecure Local (desktop)?" and proceed accordingly.
• Current location queries — when the user asks "what's my current location", "whereami", "where am I", or any equivalent, run LE -7 and share the output. No other flags are needed. Note: LE -7 accesses device GPS — this is a privacy-sensitive operation. On first use in a session, inform the user: "This will query your device's GPS location via LE." Proceed only after acknowledgment.

Destructive Flags — -c and -j (MANDATORY)#

• -c (clean) deletes the source file after encryption or decryption. It is irreversible in-place data loss.
• -j is a trio that includes -c, so it is also destructive.
• Never silently add -c or -j. Before using either, ask the user explicitly, e.g.: "This will delete the source <file> after the operation. Confirm with 'yes, delete source' to proceed."
• If the user does not confirm, use only -z (and -n for folders). The source stays on disk.
• When the user explicitly asks for -j or "clean/delete source after", use -j and state in the response that the source was removed.

Binary Location (configuration)#

The skill looks for the LE binary in this order:

1. The LE_BIN environment variable, if set (e.g., export LE_BIN=/opt/le/LE).
2. LE on PATH (via command -v LE).
3. A user-supplied path if neither of the above resolves. In that case, ask the user for the binary path — do not guess or hardcode.

In examples below, LE is used as a shorthand for whichever path resolves. When actually invoking, expand it to the full resolved path so the command is reproducible.

bash

# Resolve once, then reuse
LE_BIN="${LE_BIN:-$(command -v LE)}"
"$LE_BIN" --help

Date & Time Rules (MANDATORY)#

All date/time handling for this skill follows these rules — no exceptions:

1. Always use EST/EDT (America/New_York) to calculate and send dates. The LE tool interprets -l and -r in EST/EDT.

2. Start time ( -l) = current EST + 2 minutes by default. This buffer prevents the "date must be in future" error.

3. End time ( -r) = start time + the user's requested duration.

4. Cross-platform time computation. Prefer Python because date flag syntax differs between BSD (macOS) and GNU (Linux). Python 3 is available on both.

   Input safety: The <N> duration value is passed as sys.argv[1] and cast via int() inside the Python script — any non-integer input raises ValueError and the script exits without executing. Never concatenate or interpolate user input directly into the python3 -c string. Always pass values as positional arguments ( sys.argv). bash

   # Start time (now + 2 minutes, EDT/EST) — no user input needed
   python3 -c "from datetime import datetime,timedelta; from zoneinfo import ZoneInfo; print((datetime.now(ZoneInfo('America/New_York'))+timedelta(minutes=2)).strftime('%Y/%m/%d %H:%M'))"
   
   # End time (now + 2 min + N minutes) — N is passed as argv[1], cast to int()
   python3 -c "import sys; from datetime import datetime,timedelta; from zoneinfo import ZoneInfo; N=int(sys.argv[1]); print((datetime.now(ZoneInfo('America/New_York'))+timedelta(minutes=2+N)).strftime('%Y/%m/%d %H:%M'))" <N>
   
   # End time (now + 2 min + N hours) — N is passed as argv[1], cast to int()
   python3 -c "import sys; from datetime import datetime,timedelta; from zoneinfo import ZoneInfo; N=int(sys.argv[1]); print((datetime.now(ZoneInfo('America/New_York'))+timedelta(minutes=2,hours=N)).strftime('%Y/%m/%d %H:%M'))" <N>
   
   

   Fallback ( date) — only if Python is unavailable:

   • macOS/BSD: TZ=America/New_York date -v+2M "+%Y/%m/%d %H:%M"
   • Linux/GNU: TZ=America/New_York date -d '+2 minutes' "+%Y/%m/%d %H:%M"

5. Always display the window back to the user in EDT/EST.

Two Modes#

1. PlainText Mode ( --PlainText / -p)#

Encrypt/decrypt inline strings. The LE binary expects the data wrapped in triple single quotes ( '''...''').

Input Sanitization (MANDATORY)

Never interpolate raw user input directly into the shell command. The '''...''' quoting breaks if the data contains single quotes, enabling shell injection. Before building the command:

1. Validate: reject or escape any single quotes ( ') in the user's plaintext. Replace each ' with '\'' (end quote, escaped literal quote, reopen quote).

2. Alternatively, use a shell variable to isolate user data from the command string: bash

   # Store user data in a variable — shell expansion is safe inside triple quotes
   LEDATA='user provided text here'
   LE -e "'''${LEDATA}'''" <LOCK_FLAGS> --PlainText
   
   

3. Never use eval or backtick interpolation with user-supplied text.

bash

# Encrypt (with sanitized data)
LE -e '''<SANITIZED_DATA>''' <LOCK_FLAGS> --PlainText

# Decrypt (encrypted output is safe — no special chars)
LE -d '''<ENCRYPTED_DATA>''' <LOCK_FLAGS> --PlainText

2. File / Folder Mode#

Default flags (safe):

• File: -z
• Folder: -z -n

Destructive extras (only with explicit user confirmation, see rules above): add -c to also delete the source, or use -j (= -z -c -n).

bash

# Safe file encrypt / decrypt (source file preserved)
LE -e <FILE>   <LOCK_FLAGS> -z
LE -d <FILE.letxt> <LOCK_FLAGS> -z

# Safe folder encrypt / decrypt (source folder preserved)
LE -e <FOLDER> <LOCK_FLAGS> -z -n
LE -d <FOLDER> <LOCK_FLAGS> -z -n

# Destructive — only after explicit user confirmation
LE -e <FILE_OR_FOLDER> <LOCK_FLAGS> -j

Naming notes:

• Encrypted files get a .le prefix on the extension (e.g., example.txt becomes example.letxt); use the .letxt filename when decrypting.
• For folders, the individual files inside get the .le prefix on their extensions. The folder name itself stays the same.

Available Locks#

FlagLock TypeValueExample-1Pin/CodeNumeric string"1122"``-wPasswordPassword file ( .letxt) or passphrasepass.letxt``-2MFAPhone number (E.164)"+19199870623"``-3OTPOTP code for decryption"123456"``-lTime lock startYYYY/MM/DD HH:MM``"2026/04/12 17:41"``-rTime lock endYYYY/MM/DD HH:MM``"2027/04/12 17:36"``-bLocation lock — use existing .lecsv key file ( encrypt only; omit on decrypt)Path to .lecsv filelocation.lecsv``-vLocation lock — create a new .lecsv key file from a GPS CSV (switch, no value)(no value)-v

Additional Flags#

FlagPurposeSafety-zForce — overwrite existing encrypted fileSafe-nRecursive — process folders recursivelySafe-cClean — delete source after encrypt/decryptDESTRUCTIVE — opt-in with confirmation-jTrio = -z -c -n — includes delete-sourceDESTRUCTIVE — opt-in with confirmation-iGet info on an encrypted fileSafe (read only)-oSpecify output file nameSafe-7Print the device's current GPS location (no other flags needed)PRIVACY-SENSITIVE — requires user consent on first use

MFA Workflow#

1. Encrypt with MFA: Use -2 "+1XXXXXXXXXX" to register the phone number.
2. Decrypt with MFA: First run decrypt with -4 <encrypted_file> to trigger OTP delivery, then run again with -3 <OTP_CODE>.

Examples#

PlainText — Pin only#

bash

LE -e '''hello world''' -1 "1234" --PlainText
LE -d '''<ENCRYPTED>''' -1 "1234" --PlainText

PlainText — All locks#

bash

LE -e '''secret data''' -w pass.letxt -1 "1122" -2 "+19199870623" -l "2026/04/12 17:41" -r "2027/04/12 17:36" --PlainText

File — Pin only (safe, source preserved)#

bash

LE -e /path/to/myfile.txt -1 "1234" -z
LE -d /path/to/myfile.letxt -1 "1234" -z

Folder — Pin + Password (safe, sources preserved)#

bash

LE -e /path/to/my_folder -w pass.letxt -1 "1234" -z -n
LE -d /path/to/my_folder -w pass.letxt -1 "1234" -z -n

File — destructive (user asked to delete source)#

bash

# Only after explicit user confirmation
LE -e /path/to/myfile.txt -1 "1234" -j

Get info on encrypted file#

bash

LE -i /path/to/myfile.letxt

Get current device location#

Requires user consent on first use in a session (privacy-sensitive — accesses device GPS).

bash

LE -7

Workflow#

1. Determine the mode: PlainText ( --PlainText) for inline strings, or File/Folder for files and directories.
2. Resolve the binary via $LE_BIN, command -v LE, or ask the user.
3. Gather lock inputs: Which locks to apply and their values.
4. Pick safe defaults: -z for files; -z -n for folders. Do not add -c or -j unless the user explicitly confirmed source deletion.
5. Build the command with the appropriate flags.
6. Execute via Bash and return the result.
7. For decryption, remind the user they need the same lock values used during encryption.

Important Notes#

• No API key is needed — LE runs entirely locally.

• Phone numbers for MFA ( -2) must be in E.164 format.

• Time lock dates use YYYY/MM/DD HH:MM format. Follow the Date & Time Rules above.

• Time locks require both -l (start) and -r (end).

• The password file ( .letxt) should be an encrypted password file created with LE -e pass.txt -q.

• Geo-location locks work in two stages: create a key file once, then reuse it to lock as many files/folders as you want.

  Stage 1 — Create the .lecsv key file from a GPS CSV ( -v):

  • Input: a plain CSV of GPS locations with distance (e.g., location.csv).
  • -v is a switch (no value); LE produces location.lecsv alongside the input.
  • MUST be paired with -1 (pin) or -2 (MFA) — otherwise LE errors with "Either Pin or MFA should be enabled for Password/Location file".

bash

LE -e location.csv -v -1 1122 -z
LE -e location.csv -v -2 "+1YourPhoneNumber" -z

Stage 2 — Use the .lecsv key file to lock files/folders ( -b):

• -b <path.lecsv> is used only on encryption.
• On decryption, do NOT pass -b — LE reads the embedded location reference from the encrypted file itself. Just run LE -d <file> -z.
• No pin/MFA pairing required — the key file is self-contained.

bash

# Encrypt (pass -b with the key file)
LE -e example.txt -b location.lecsv -z

# Decrypt (do NOT pass -b)
LE -d example.letxt -z