Token Optimization for OpenClaw#

Systematic guide to reduce per-turn token consumption by 70%+ without losing any functionality.

When to Use This Skill#

• session_status shows Context > 30% on simple messages
• Cache hit rate is 0% or consistently low
• AGENTS.md > 5KB or MEMORY.md > 3KB
• You want to cut API costs on Anthropic models

Prerequisites#

• OpenClaw 2026.3.x or later
• Access to edit openclaw.json
• At least one Anthropic model configured

---

Step 1: Audit Current State#

Run session_status and record:

text

Cache: X% hit · Y cached, Z new
Context: Xk/200k (X%)

Then check file sizes:

bash

wc -c ~/.openclaw/workspace/*.md

Red flags:

• Any single file > 10KB → needs splitting
• Total workspace files > 30KB → bloated
• Cache 0% → caching not enabled
• Context > 40% on simple message → pruning too loose

Step 2: Split Large Files (Layer 1)#

AGENTS.md (biggest offender)#

Move infrequently-needed content to separate files:

ContentMove ToLoad WhenSubagent protocolsAGENTS_SUBAGENT.mdOnly when spawningHeartbeat rulesAGENTS_HEARTBEAT.mdOnly during heartbeatDetailed examplesmemory/ directoryOn demand via read

Target: AGENTS.md ≤ 5KB

Keep only: session rules, safety, formatting, quick-reference subagent table.

Add references at the top:

markdown

> Subagent protocol → `AGENTS_SUBAGENT.md` (read on demand)
> Heartbeat protocol → `AGENTS_HEARTBEAT.md` (read during heartbeat)

MEMORY.md#

Move detailed SOPs and procedures to memory/ subdirectory files. Keep only high-frequency referenced items.

Target: MEMORY.md ≤ 3KB

BOOTSTRAP.md#

Delete it after initial setup. It loads every turn for zero value.

bash

mv ~/.openclaw/workspace/BOOTSTRAP.md ~/.openclaw/workspace/BOOTSTRAP.md.bak

Verify#

bash

# Sum only files that load every turn
cat ~/.openclaw/workspace/{AGENTS,SOUL,TOOLS,IDENTITY,USER,HEARTBEAT,MEMORY}.md | wc -c
# Target: < 15KB total

Step 3: Enable Prompt Caching (Layer 2)#

Add cacheRetention to each Anthropic model in openclaw.json:

json

{
  "agents": {
    "defaults": {
      "models": {
        "anthropic/claude-opus-4-6": {
          "params": { "cacheRetention": "long" }
        },
        "anthropic/claude-sonnet-4-6": {
          "params": { "cacheRetention": "long" }
        },
        "openrouter/anthropic/claude-3.5-sonnet": {
          "params": { "cacheRetention": "short" }
        }
      }
    }
  }
}

Values#

ValueCache WindowBest FornoneNo cachingBursty/notification agentsshort~5 minutesOpenRouter modelslong~1 hourMain agent (recommended)

Provider Support#

ProviderSupportAnthropic direct API✅ FullOpenRouter anthropic/*✅ Auto cache_control injectionBedrock Anthropic Claude✅ Pass-throughOther providers❌ No effect

Keep-Warm Tip#

Pair cacheRetention: "long" with heartbeat at ~55 min intervals to keep cache permanently warm:

json

"heartbeat": {
  "every": "55m",
  "model": "your/cheap-model"
}

Step 4: Tune Context Pruning (Layer 3)#

json

{
  "agents": {
    "defaults": {
      "contextPruning": {
        "mode": "cache-ttl",
        "ttl": "3m",
        "keepLastAssistants": 2,
        "softTrimRatio": 0.25,
        "hardClearRatio": 0.45,
        "tools": {
          "allow": ["exec", "read", "browser"],
          "deny": ["web_search", "web_fetch"]
        }
      }
    }
  }
}

Parameter Guide#

ParameterAggressiveModerateConservativettl2m3m5mkeepLastAssistants123softTrimRatio0.200.250.30hardClearRatio0.400.450.50

Tool Deny List#

Move large, one-off tool outputs to deny:

• web_fetch — page content is large and rarely reused
• web_search — search results change every time

Keep frequently reused tools in allow:

• exec — command outputs often referenced in follow-up
• read — file contents may be discussed across turns
• browser — snapshot data may be referenced

Step 5: Optimize Model Routing#

Use cheap/free models for low-value tasks:

json

"heartbeat": {
  "every": "4h",
  "model": "your/free-flash-model"
}

TaskModel TierWhyHeartbeat/cronFree/flashSimple checks, zero costSimple Q&AFree/flashDoesn't need intelligenceMedium tasksMid-tierBalance cost and qualityComplex/multi-stepPremiumWorth the investment

Step 6: Validate & Monitor#

After applying all changes, restart gateway and check:

bash

openclaw gateway restart

Then send a simple message and run session_status:

Target KPIs#

MetricTargetCheck ViaCache Hit Rate> 80%Cache: X% hitSimple Q&A Input< 20k tokensTokens: X inContext (idle)< 30%Context: Xk/200kCompactions/day< 2Compactions: X

Troubleshooting#

SymptomCauseFixCache still 0%Model doesn't support cachingCheck provider is AnthropicHigh cacheWrite every turnVolatile content in system promptMove volatile files to on-demandContext > 50% quicklyPruning too looseLower ttl and softTrimRatioCompactions > 3/dayLong conversations without pruningEnable cache-ttl mode

---

Summary Checklist#

• Audit: wc -c on workspace files + session_status
• Split: AGENTS.md ≤ 5KB, MEMORY.md ≤ 3KB
• Delete: BOOTSTRAP.md (if exists)
• Cache: cacheRetention: "long" on Anthropic models
• Prune: contextPruning with aggressive settings
• Route: Cheap model for heartbeat/simple tasks
• Validate: session_status shows cache hits + low context %
• Monitor: Weekly review of KPIs