Unified Session#

One agent. All your devices. Zero context loss.

text

  Before                              After
┌──────────┐  ┌──────────┐     ┌──────────────────────┐
│ Telegram │  │ Webchat  │     │    agent:main:main    │
│ Session A│  │ Session B│     │                       │
│ "Buy milk│  │ "What was│     │  Telegram ──┐         │
│  tomorrow│  │  I doing?│     │  Webchat ───┤ shared  │
│  ..."    │  │  🤷"     │     │  DingTalk ──┤ context │
└──────────┘  └──────────┘     │  Feishu ────┘         │
     ❌ Context lost            │                       │
                                └──────────────────────┘
                                     ✅ Full continuity

The Problem#

You connected multiple channels to OpenClaw. Each one starts a separate conversation. You research something on your laptop via webchat, grab your phone, message from Telegram — and the agent has no idea what you were talking about.

This is the #1 pain point for single-user OpenClaw setups. The default config isolates channels for multi-user safety, but most people just want one personal AI that works everywhere.

The Fix#

One config value: dmScope: "main". That's it.

text

┌─────────────────────────────────────────────────┐
│  session.dmScope: "main"                        │
│                                                 │
│  All DMs from all channels → one session        │
│  Replies auto-route back to source channel      │
│  No manual switching. No context loss.          │
└─────────────────────────────────────────────────┘

Quick Reference#

SettingValueEffectsession.dmScope``"main"All DMs → one shared session ✅session.dmScope``"per-channel-peer"Each channel isolated ❌ (default)

Who Should Use This#

✅ You're the only person talking to your agent ✅ You use 2+ channels (webchat + phone app) ✅ You want one continuous conversation across devices

⚠️ Do NOT use if multiple people DM your bot — context would leak between users

Setup#

Step 1: Diagnose#

bash

cat ~/.openclaw/openclaw.json | python3 -c "
import json, sys
cfg = json.load(sys.stdin)

session = cfg.get('session', {})
dm_scope = session.get('dmScope', 'NOT SET')
print(f'Global dmScope: {dm_scope}')

channels = cfg.get('channels', {})
for name, ch in channels.items():
    if not ch.get('enabled', True): continue
    ch_dm = ch.get('dmScope', 'inherits global')
    ok = '✅' if (dm_scope == 'main' and ch_dm in ('main', 'inherits global')) else '❌'
    print(f'  {ok} {name}: dmScope={ch_dm}')

if dm_scope == 'main':
    bad = [n for n,c in channels.items() if c.get('enabled',True) and c.get('dmScope') not in (None,'main')]
    if not bad: print('\\n✅ Unified session is already working!')
    else: print(f'\\n❌ Fix these channels: {bad}')
else:
    print(f'\\n❌ Set session.dmScope to \"main\"')
"

bash

openclaw sessions  # should show 1 session per agent

If the diagnosis says ✅, skip to Step 4 (Verify). Otherwise continue.

Step 2: Configure#

Edit ~/.openclaw/openclaw.json:

json5

{
  // Add or update this:
  "session": {
    "dmScope": "main",
    "mainKey": "main"
  }
}

For each enabled channel, add "dmScope": "main":

json5

// Only touch channels that exist in YOUR config
"channels": {
  "telegram":           { "dmScope": "main" },
  "discord":            { "dmScope": "main" },
  "dingtalk-connector": { "dmScope": "main", "routing": [{"agent": "main"}] },
  "feishu":             { "dmScope": "main", "routing": [{"agent": "main"}] },
  "whatsapp":           { "dmScope": "main" },
  "signal":             { "dmScope": "main" },
  "slack":              { "dmScope": "main" }
}

Step 3: Restart#

bash

openclaw gateway restart

Step 4: Verify#

Send a test message from each channel. After each one:

bash

openclaw sessions  # still 1 session? token count growing? ✅

The real test: tell the agent something from Channel A, then ask about it from Channel B. If it remembers — you're done.

Reply Routing#

Replies go back to wherever the message came from. Automatic.

text

You message from Telegram  → reply goes to Telegram
You message from webchat   → reply goes to webchat
You message from DingTalk  → reply goes to DingTalk

For cron/announce: output goes to the channel you last messaged from ( lastRoute).

Troubleshooting#

ProblemFixBot forgets when switching channelsRun diagnostic in Step 1. Likely dmScope not set to "main"Messages from a channel don't arriveopenclaw gateway restart — connections silently dropMultiple sessions still showingOld sessions expire naturally. New messages use unified sessionCron output goes to wrong channelSet delivery.channel explicitly in cron config

Channel-Specific Notes#

• DingTalk: Stream SDK connects to dynamic endpoints. Network changes (VPN, Wi-Fi) can break it silently. Gateway restart fixes it.
• Feishu: Ensure app is published and event subscription includes im.message.receive_v1.
• Telegram/Discord/WhatsApp: Generally stable. If messages stop, restart gateway.

Reverting#

Want isolated sessions back? One change:

json5

{ "session": { "dmScope": "per-channel-peer" } }

Then openclaw gateway restart.

Security#

• This skill does NOT send data anywhere
• This skill does NOT modify system files outside OpenClaw config
• This skill does NOT require API keys or credentials
• All changes are to ~/.openclaw/openclaw.json only
• Fully reversible

The only security consideration: with dmScope: "main", anyone who can DM your bot shares the same session. Fine for single-user. Switch to per-channel-peer if you add users.

Run openclaw security audit after setup to verify.

Feedback#

• If useful: clawhub star unified-session
• Stay updated: clawhub update unified-session

---

🇨🇳 中文说明#

统一会话 — 一个 Agent，所有设备，上下文零丢失#

在电脑上开始对话，拿起手机继续聊——同一个上下文，同一份记忆，无缝切换。

痛点#

你给 OpenClaw 接了钉钉、飞书、Telegram、Discord、网页版……但每个渠道都是 独立的对话。你在电脑上让 Agent 查个东西，出门掏出手机用钉钉问进度——它完全不记得你说过什么。

这是单用户 OpenClaw 部署的 头号痛点。默认配置为了多用户安全做了渠道隔离，但大多数人只是想要一个 随时随地都能用的私人 AI 助手。

解决方案#

bash

clawhub install unified-session

然后对你的 Agent 说：

"帮我设置统一会话，让所有渠道共享同一个对话"

一个配置项 dmScope: "main"，重启一次 Gateway，搞定。

你会得到#

• ✅ 多端无缝衔接 — 电脑 ↔ 手机 ↔ 平板，任意 App
• ✅ 共享记忆 — 不管从哪个 App 发消息，Agent 都记得所有上下文
• ✅ 自动回复路由 — 从钉钉发消息 → 回复自动回钉钉；从飞书发 → 回飞书
• ✅ 全渠道支持 — 钉钉、飞书、Telegram、Discord、WhatsApp、Signal、Slack、网页版
• ✅ 一次配置，永久生效
• ✅ 完全可逆 — 随时切回独立会话
• ✅ 零外部依赖 — 不需要 API Key，不需要额外服务，不发送网络请求

适用场景#

✅ 你是 Agent 的 唯一用户（个人部署） ✅ 你用了 2 个以上渠道（网页版 + 手机 App） ✅ 你想要 一个连续的对话 跨所有设备

⚠️ 多人使用的机器人不适用 — 如果多人给你的 Agent 发私信，请保持渠道隔离（ per-channel-peer），防止上下文泄露。

安全性#

• 不连接外部服务，不需要 API Key，不发送网络请求
• 只修改 ~/.openclaw/openclaw.json
• 一个配置项即可完全回退
• 设置完成后建议运行 openclaw security audit 检查

安装#

bash

clawhub install unified-session

详细步骤见上方英文部分的 Setup 章节，Agent 会自动引导你完成全部流程。